128×32 2.23inch OLED Display Module for Raspberry Pi SSD1305 Driver SPI/I2C

Description

This auction is for 2.23inch OLED HAT
2.23inch OLED display HAT for Raspberry Pi, 128×32 pixels, SPI/I2C interface
Overview
This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.
Trying to add a control interface for your Pi? This compact display would be the ideal choice.
Features
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Optional interfaces: SPI (default), or I2C, configured via onboard resistor
Brings control pins for host boards like Arduino/STM32
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Driver: SSD1305
Interface: SPI / I2C
Display size: 2.23inch diagonal
Display color: white
Resolution: 128×32
Viewing angle: >160°
Power supply voltage: 3.3V/5V
Logic level: 3.3V
Demo
Interface
SYMBOL
Raspberry Pi PIN (BCM)
DESCRIPTION
VCC
3V3/5V
Power input
GND
GND
Ground
DIN
MOSI
SPI data input
CLK
SCLK
SPI clock input
CS
CE0
Chip selection, low active
DC
P24
Data/Command selection (high for data, low for command)
RST
P25
Reset, low active
Dimensions
Development Resources
Wiki :
www.waveshare.com/wiki/2.23inch_OLED_HAT
Package Contains
2.23inch OLED HAT x1
RPi screws pack (2pcs) x1
1
2