-40%
2.4 inch Serial UART TFT LCD Display Screen for Raspberry Pi Arduino UNO R3 Mega
2.4 inch Serial UART TFT LCD Display Screen for Raspberry Pi Arduino UNO R3 Mega

2.4 inch Serial UART TFT LCD Display Screen for Raspberry Pi Arduino UNO R3 Mega

$ 7.38

Availability: 45 in stock
  • Number of Pins: 4
  • Refund will be given as: Money Back
  • Country/Region of Manufacture: China
  • Interface Type: UART
  • Item must be returned within: 30 Days
  • Nominal Current Rating: 90mA in Max
  • Color: Red
  • Display Size: 2.4 in
  • MPN: Does Not Apply
  • Condition: New
  • All returns accepted: Returns Accepted
  • Model: FZ5116
  • Return shipping will be paid by: Buyer
  • Touch Screen: No
  • Shipping: Free shipping with full tracking information
  • Nominal Voltage: 4.5V - 5.5V
  • Brand: RCmall
  • Display Resolution: 240 x 320 Pixel
  • Restocking Fee: No

    Description

    Store category
    Sign Up Now !
    You may also like
    2.4 inch Serial UART TFT LCD Display Screen for Raspberry Pi Arduino UNO R3 Mega2560 Nano Leonardo
    Product Description
    2.4 inch Serial UART TFT LCD Display Screen for Raspberry Pi Arduino UNO R3 Mega2560 Nano Leonardo
    Description:
    This is a 2.4 inch TFT LCD expansion board using standard serial UART interface. It integrates TF card holder, level conversion circuit, and the secondary development is less difficult.
    - Compatibility: compatible with 3.3V / 5V MCU, such as for Arduino UNO R3 STM32 51MCU RPi
    - Built-in functions: Only a few commands are needed to display the pictures in the TF card, displaying characters, numbers, graphics.
    - Working voltage: 4.5V - 5.5V (On-board 3.3v LDO Regulator),if short the pad VCC to 3V3, you can use 3.1-3.4V.
    - Working current: 90mA(Max)
    - Serial port baud rate: 9600 (default), support modified via command to be: 19200, 38400, 57600, 115200
    - Serial communication format: 8N1
    - You can debug the module with the USB to TTL module, such as FT232RL, CH340G module.
    - Onboard ATmega328 Series MCU
    - Resolution: 240x320;
    - Display size: 2.4 inch;
    - Operating voltage: 5V;
    - Onboard card slot, support Micro / TF Card;
    Package Included:
    1pcs 2.4 TFT LCD screen
    Payment
    Shipping
    Delivery time
    Return Policy
    Contact us
    Payment
    1.We accept Paypal payment only , you can use credit card through PayPal.
    2.Please make payment asap,then we can arrange shipment for you asap.
    Shipping
    If total amount ≥ 7usd ,we provide a tracking number with
    you.
    Delivery time
    Normally it arrive in 10-30 business days when your order amount is more than 7usd.
    And 30-60 days when amount is less than 7usd.
    Return Policy
    1.All products are eligible for 30-days money back guarantee.
    2.All returns should be guided by us, please contact us for detail before you return anything.
    Contact us
    We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    Description: This is a 2.4 inch TFT LCD expansion board using standard serial UART interface. It integrates TF card holder, level conversion circuit, and the secondary development is less difficult. - Compatibility: compatible with 3.3V / 5V MCU, such as for Arduino UNO R3 STM32 51MCU RPi - Built-in functions: Only a few commands are needed to display the pictures in the TF card, displaying characters, numbers, graphics. - Working voltage: 4.5V - 5.5V (On-board 3.3v LDO Regulator),if short the pad VCC to 3V3, you can use 3.1-3.4V. - Working current: 90mA(Max) - Serial port baud rate: 9600 (default), support modified via command to be: 19200, 38400, 57600, 115200 - Serial communication format: 8N1 - You can debug the module with the USB to TTL module, such as FT232RL, CH340G module.