5.65inch Colorful e-Paper E-Ink Display Module for Raspberry Pi Pico

Description

5.65inch Colorful E-Paper E-Ink Display Module For Raspberry Pi Pico, 600×448 Pixels, ACeP 7-Color
5.65"
7-Color
E-Paper Module
For Pico
Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Size
5.65"
Resolution
600×448
Viewing Angle
>170°
Display Color
7-Color
Grey Scale
2
Communication
SPI
Display Panel
E-paper
Experience
Paper-like
Environment
Ambient Light Required
Display Type
Passively Reflective
Power Consumption
Ultra Low
Display Duration
Persists without Power
Features At A Glance
Advanced Color ePaper (ACeP) technology, supports 7-Color display
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications
OPERATING VOLTAGE
3.3V/5V
DISPLAY COLOR
ACeP 7-Color
RESOLUTION
600×448 pixels
GREY SCALE
2
INTERFACE
3-wire SPI, 4-wire SPI
VIEWING ANGLE
>170°
PARTIAL REFRESH TIME
N/A
FULL REFRESH TIME
<35s
OUTLINE DIMENSIONS
128 × 101.5mm
DISPLAY SIZE
114.9 × 85.8mm
REFRESH POWER
50mW (typ.)
STANDBY CURRENT
<0.01uA (almost none)
DOT PITCH
0.1915 × 0.1915mm
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Raspberry Pi Pico Header Compatibility
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
Raspberry Pi Pico
is NOT included.
Onboard SPI Control Interface
For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
VCC
3.3V/5V
GND
Ground
DIN
SPI MOSI pin
SCK
SPI SCK pin
CS
SPI chip selection, low active
DC
Data / Command selection (high for data, low for command)
RST
External reset, low active
BUSY
Busy status output
Onboard Voltage Translator
Compatible With 3.3V / 5V MCUs
Pinout Definition
Application Examples
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
Outline Dimensions
PACKAGE CONTENT
Weight:
0.094 kg
Pico-ePaper-5.65 x1
Standoff pack x1
1
2